-
Do not use flammable liquids to start
or accelerate any fire.
-
Keep a glass or metal screen in
front of the fireplace opening, to prevent embers or sparks from
jumping out, unwanted material from going in, and help prevent the
possibility of burns to occupants.
-
The stove should be burned hot twice
a day for 15 - 30 minutes to reduce the amount of creosote build up.
-
Don't use excessive amounts of paper
to build roaring fires in fireplaces. It is possible to ignite
creosote in the chimney by overbuilding the fire.
-
Never burn charcoal indoors. Burning
charcoal can give off lethal amounts of carbon monoxide.
-
Keep flammable materials away from
your mantel.
-
A spark from the fireplace could
easily ignite these materials.
-
Before you go to sleep, be sure your
fireplace fire is out. NEVER close your damper with the hot ashes
in the fireplace. A closed damper will help the fire to heat up
again and will force toxic carbon monoxide into the house.
-
If synthetic logs are used, follow
the directions on the package. Never break a synthetic log apart to
quicken the fire or use more than one log at a time. They often burn
unevenly, releasing higher levels of carbon monoxide.
|
|
FURNACE HEATING
It's important that you have your furnace
inspected to insure that it is in good working condition.
-
Be sure all furnace controls and
emergency shutoffs are in proper working condition.
-
Leave furnace repairs to qualified
specialists. Do not attempt repairs yourself unless you are qualified.
-
Inspect the walls and ceiling near the
furnace and along the chimney line. If the wall is hot or discolored,
additional pipe insulation or clearance may be required.
-
Check the flue pipes and pipe seams.
Are they well supported? Free of holes, and cracks? Soot along or
around the seams may be an indicator of a leak
-
Is the chimney solid? No cracks or
loose bricks? All unused flue openings should be sealed with solid
masonry.
-
Keep trash and other combustibles away
from the heating system.
|